Find a finish / Specification reference
Find Zinc Nickel (ZnNi), Tin Zinc (SnZn), and Zinc Iron (ZnFe) plating by manufacturer or specification number. Each reference links to the relevant finish and its application notes.
OEM & industry reference
A drawing may identify a finish by a specification number, coating code, alloy designation, or proprietary system. Use this directory to find the listed finish association, then review the complete drawing requirements with our team.
The same specification family may cover multiple finishes. Parenthetical alloy, grade, and system qualifiers below are part of the reference.
All listed finish references are shown below.
Confirm the complete coating designation; older drawings may refer to GS 90010.
Tin-zinc-designated variants only. The RS10-04 family also covers other finishes; confirm the complete suffix and lubrication requirements.
Legacy zinc-nickel-designated systems only; confirm the full coating code and required revision.
Zinc-nickel-designated requirements only; confirm the complete DX identifier, revision, passivate, and topcoat. Family identifiers can include other finishes.
Tin-zinc requirements only; confirm the drawing revision and post-treatment.
Zinc-iron-designated requirements only; confirm the complete designation, revision, passivate, and topcoat. Family identifiers can include other finishes.
Withdrawn drawing reference, superseded by DIN EN ISO 19598. Confirm the specification required by the drawing.
The specified passivate, sealer, color, and lubricity are part of the coating system. WSS-M21P44 references are legacy drawing requirements; the A3 listing covers the zinc-nickel basecoat, and the required cathodic electrocoat and complete system must be confirmed.
Electroplated tin-zinc requirements only; confirm the drawing suffix, thickness, and post-treatment.
WSS-M21P46-A1 requires the specified zinc-iron, passivate, and topcoat system.
GM 6138M and GM 6280M are legacy references. Confirm the required coating system and drawing code.
GM 6280M is a legacy reference; confirm the tin-zinc requirements and acceptable post-treatment.
Legacy and coating-family references; confirm the zinc-iron requirements, drawing code, and revision.
Applicable zinc-nickel coating designations only; confirm the required revision.
Applicable tin-zinc coating designations only; confirm the required revision.
Applicable zinc-iron coating designations only; confirm the required revision.
Applicable zinc-nickel coating designations only.
Applicable zinc-iron coating designations only.
Zinc-nickel requirements for the stated coating class; confirm the drawing and supplementary treatment.
Review Zinc Nickel requirements for International / Navistar
Historical tin-zinc drawing reference. Confirm the required revision or successor MPAPS specification during quotation.
For tin-zinc, ISO 4042 covers dimensional requirements for fasteners with ISO metric threads.
Applicable zinc-nickel coating designations only.
Applicable tin-zinc coating designations only.
Legacy DBL 8451 drawing references; confirm the required revision and any successor specification.
Zinc-iron coating requirements; confirm the complete finish code and drawing revision.
Drawing-specific zinc-nickel finish codes; confirm the complete coating system and drawing revision.
Legacy Chrysler/FCA references may appear on drawings. Coating-system, approved-alternative, and approval requirements must be confirmed.
Review Zinc Nickel requirements for Stellantis (Chrysler / FCA)
Confirm the required revision; older drawings may call out PS-8956E. PS-13285 specifies a tin-zinc basecoat with an organic topcoat; confirm the complete coating system.
Review Tin Zinc requirements for Stellantis (Chrysler / FCA)
Review Zinc Iron requirements for Stellantis (Chrysler / FCA)
Zinc-nickel grades only. Confirm the complete grade, passivation, sealer/lubrication, and required revision during quotation.
Tin-zinc coating-system requirements; confirm the current drawing revision and supplementary treatment.
Grade 20 zinc-iron requirements. Confirm the complete grade, passivation, sealer/lubrication, and required revision during quotation.
Confirm the specified alloy composition, coating thickness, passivation, and finish code.
Zinc-iron coating requirements; confirm the drawing revision and complete coating designation.
Zinc-nickel-designated systems only. Confirm the complete surface-treatment code and required topcoat.
Applicable zinc-nickel coating systems only; confirm the required surface-treatment code.
STD 5732,104 is a legacy reference. Volvo Cars VCS references apply only to the specified zinc-iron coating systems and surface-treatment codes.
Quote the complete requirement
Send your part drawing, specification and revision, finish code, coating thickness, color, post-treatment, production volume, and required testing. Identify any customer or OEM approval requirements so our team can review the complete coating system.
Request a specification-based quote
Review testing capabilities · Certificates and laboratory scope